Zhejiang Lanbang Pump Industry Co.,Ltd. - Sumbersible Pumps,Sewage Pumps,China Sumbersible Pump,Sewage Pump Manufacturers,Suppliers

PRODUCTS

Home > Submersible Sewage Pump Series V180F/ V250F >

V180F/V250F

CONDITION OF USAGE
1.The maximum deep it is allowed in water is 5m from its center of impeller;
2.The trans medium' s temperature shouldn’t be higher than 40℃
3.The trans medium' s pH scope is from 4～10;
4.the Kinematics viscosity of the trans medium is 7x10^-7～23x10^-6 m²/s ;
5.The maximum density of the trans medium is 1.2 x 10³kg/m³.
FUNCTION AND FEATURE
This advanced V(WQ) series, a branch of single-phase drainage pumps, will be your ideal drainage helper. The letter "V" which substtutes for the letters "WQ",indicates the distinct design of the filter and the broadness of the high efficient area. It can work safely and efficiently at high flux with the feature of complete heads. The design is designed to a wide tunnel which helps to convey the long fiber liquid or the solid whose diameter is about 15mm. The selection of bottom suction structure, stainless steel and special cast iron made the pump has the capabilities of complete drain and high resistance of abrasion and corrosion. The float switch can automatically control on nd off with change of the liquid level. The prote ctor in the motor can automatically cut off the power when it overheated over cuented ,thus guarantee the security and reliability of pump's run even in the atrocious environment.

MODEL	P2		DN	DIMENSIONS(mm)			WEIGHT(kg)
1～220V/240V	kw	HP	DN	a	b	h	kg
V180F	0.18	0.25	1"	83	170	400	9.8
V250F	0.25	0.37	1"	83	170	400	10.2

Code “F’ means pump assembled with float switch

No.	Description	Material	Quantity	Remark
1	Screw	SUS201	3
2	Cable plug	Assembly	1
3	Spring washer	SUS201	12
4	Screw	SUS201	4
5	Cable clamp	SUS201	2
6	handle	SUS201	1
7	Cable presser	Fluorine rubber	2
8	Cross screw	SUS201	4
9	cable fixed plate	SUS201	2
10	Cable protector	Fluorine rubber	2
11	float switch	Assembly	1
12	upper screw cap	HT200	1
13	O ring	NBR	2
14	Capacitor	Assembly	1
15	insulation cap	Assembly	3
16	cross screw	Q235A	1
17	Convenient bend	Fluorine rubber	1
18	upper bearing seat	HT200	1
19	barrel	SUS201	1
20	coil	Assembly	1
21	Undulated washer	65Mn	1
22	bearing	Assembly	2
23	rotor	Assembly	1
24	pin	SUS201	1
25	screw	SUS201	3
26	Hydro-cylinder	HT200	1
27	O ring	NBR	2
28	oil plug	SUS201	2
29	Mechanical cover	Assembly	1
30	O ring	NBR	1
31	Hydro-cylinder cover	HT200	1
32	Skeleton seal	Assembly	1
33	Screw	SUS201	3
34	Impeller	HT200	1
35	spring washer	Q235A	1
36	bolt	Q235A	1
37	O ring	NBR	1
38	pump head	HT200	1
39	O ring	NBR	1
40	outlet	HT200	1
41	base	HT200	3
42	screw	SUS201	3

Diagram

PERFORMANCE DATA 50Hz

MODEL	P2		DELIVERY n≈2850 r/min
1～220V/240V	kw	HP	Q m3/h Q l/min	0	0.6	1.2	1.8	2.4	3.0	3.6	4.2	4.8
1～220V/240V	kw	HP	Q m3/h Q l/min	0	10	20	30	40	50	60	70	80
V180F	0.18	0.25	H(m)	7.0	6.3	5.8	5.3	4.8	4.3	3.8	3.0	1.6
V250F	0.25	0.37	H(m)	7.2	6.5	6.0	5.5	5.1	4.5	4.0	3.2	2.0

BACK